LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 6L80/6L90 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0965-P0967 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0965 

The Transmission Control Module detects an internal electrical performance malfunction of the clutch pressure control solenoid 2 control circuit where the measured clutch pressure control solenoid 2 current does not equal the commanded clutch pressure control solenoid 2 current for 5 s.

P0966 

The Transmission Control Module detects a short to ground on the clutch pressure control solenoid 2 control circuit for 1 s.

P0967 

The Transmission Control Module detects an open or short to voltage on the clutch pressure control solenoid 2 control circuit, for 1 s.