Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0815, P0816 or P0826
- DTC P0815, P0816, P0826, P182E, P1876, P1877, P1915 or P1761 is not set.
- The ignition voltage is 8.6 volts or greater.
- The engine speed is 400 RPM or greater for 5 seconds.
P1876
- DTC U0100, P0815, P0816, P0826, P1825, P1876 or P1915 is not set.
- The ignition voltage is 8.6 volts or greater.
- The engine speed is 400 RPM or greater for 5 seconds.