LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 6L80/6L90 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0796 or P0797 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The clutch pressure control solenoid 3 is part of the control solenoid valve assembly, which has no serviceable parts. The Clutch Pressure Control Solenoid 3 regulates transmission fluid pressure to the CBR1/C 4-5-6 clutch regulator valve which controls pressure to the low/reverse clutch and the 4-5-6 clutch. The Transmission Control Module calculates gear ratio based on the RPM signals from the input speed sensor (ISS) and the output speed sensor (OSS). The Transmission Control Module compares the expected transmission gear ratio to the calculated gear ratio for each commanded gear.

scientia non olet · About LEMON Manuals