Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
- Ignition voltage is between 8.6-32 V.
- The engine speed is between 400-7,500 RPM for 5 s.
- High Side Driver 1 is enabled.
- The Throttle Position signal voltage is valid.
- Throttle position is 0.5 percent or greater.
- Transmission fluid temperature is -6.6°C (20.12°F) or greater.
- The Transmission Output Speed is 67 RPM or greater.