Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0751
- 1st gear is commanded.
- TCM detects a gear ratio of 1.09-1.20.
- Gear slip is greater than 400 RPM for 2 s.
- The above conditions have to occur 8 times to set.
P0752
- 3rd gear is commanded.
- Transmission has achieved 1st or 2nd gear.
- Gear slip is 400 RPM for 1.5 s.
- TCM commands 4th gear if the above condition exist and detects a gear ratio of 3.82-4.22 for 1.5 s.
- The above conditions have to occur 5 times.