Conditions for Running the DTC

P0722

• DTC P0101, P0102, P0103, P0121, P0122, P0123, P0716, P0717, or P0723 is not set.
• Ignition voltage is between 8.6-32 V.
• The transmission fluid temperature is -40°C (-40°F) or greater.
• The engine speed is 400-7,500 RPM or greater for 5 s.
• The engine torque signal is valid.
• The engine torque is 50 (36.87 lb ft) or greater.
• Accelerator pedal position signal is valid.
• The throttle position signal is valid.
• The throttle position is 8 percent or greater.

P0723

• DTC P0101, P0102, P0103, P0121, P0122, P0123, P0973, P0974, P0976, or P0977 is not set.
• Ignition voltage is between 8.6-32 V.
• The engine speed is 400-7,500 RPM for 5 s.
• Greater than 5 s since the last transmission upshift or downshift.
• The TCM must receive a valid torque signal from the ECM.
• Accelerator pedal position signal is valid.