Action Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
P0722
- DTC P0722 is a Type A DTC.
- The TCM turns Off the TCC.
- The TCM commands maximum line pressure.
- The ECM reduces engine torque based on input speed.
- The TCM inhibits Tap up/Down function.
- The TCM inhibits manual shifting of all forward gears.
- The TCM commands neutral gear if the output speed sensor signal is 1,350 RPM or greater.
- The TCM commands 2nd gear if the output speed sensor signal is less than 1,350 RPM.
P0723
- DTC P0723 is a Type A DTC.
- The high side driver is turned OFF.
- The TCM inhibits TCC.
- The TCM commands maximum line pressure.
- The ECM reduces engine torque based on the signal from the input speed sensor signal.
- The TCM inhibits neutral idle.
- The TCM inhibits Tap up/Down function.
- The TCM inhibits manual shifting.