Action Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
P0716
- DTC P0716 is a Type A DTC.
- The high side driver is turned Off.
- The TCM commands TCC Off.
- The ECM reduces engine torque based on transmission input speed.
- The TCM inhibits Tap Up/Down.
- The TCM inhibits manual shifting of forward gears.
- The TCM inhibits Tow/Haul mode.
P0717
- DTC P0717 is a Type A DTC.
- The TCM inhibits shift adaptive functions.
- The TCM commands maximum line pressure.
- The ECM reduces engine torque based on transmission input speed.
- The TCM inhibits neutral idle.
- The TCM inhibits Tap Up/Down function.
- The TCM inhibits manual shifting of forward gears.
- The TCM inhibits manual shifting of forward gears.
- The TCM commands neutral gear if the output speed sensor signal is 1,500 RPM or greater.
- The TCM commands second gear if the output speed sensor signal is less than 1,500 RPM.