Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel tank. Refer to Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank) , Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) .
- Disconnect the evaporative emission (EVAP) line quick connect fitting from the vent valve and reposition the line out of the way. Refer to Plastic Collar Quick Connect Fitting Service .
- Using a slight rocking motion while pulling straight up, remove the fuel tank pressure sensor (1).