LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Tank Pressure Sensor
    GM1704933Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel tank pressure sensor (1).
  2. Position the EVAP line and connect the EVAP line quick connect fitting to the vent valve. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel tank. Refer to Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank) .
scientia non olet · About LEMON Manuals