LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement (2500 - 98.4L (26 gal) Tank - Front) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Level Sensor Retaining Clip
    GM1705920Courtesy of GENERAL MOTORS COMPANY
  1. Slide the fuel level sensor up onto the bucket until the sensor engages the retaining tab (1).
    2. Fig 2: View Of Fuel Level Sensor Electrical Connector
    GM1705918Courtesy of GENERAL MOTORS COMPANY
  2. Connect the fuel level sensor electrical connector (1) under the module cover.
  3. Install the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (2500 LWB - 98.4L (26 gal) Tank Front) .
scientia non olet · About LEMON Manuals