LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement (2500 - 43.5L (11.5 gal) Tank - Rear) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Level Sensor, Electrical Connector & Retaining Clip
    GM1705922Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (2500 LWB - 43.5L (11.5 gal) Tank Rear) .
  2. Disconnect the fuel level sensor electrical connector (3) from under the module cover.
  3. Release the level sensor retaining clip (1).
  4. Slide the fuel level sensor (2) down off the bucket.
scientia non olet · About LEMON Manuals