LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement (1500 Series w/E85) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Level Sensor Electrical Connectors
    GM1823400Courtesy of GENERAL MOTORS COMPANY
  1. Connect the fuel level sensor electrical connectors (1).
  2. Install the fuel level sensor to the module.
  3. Position and slide the fuel level sensor down until the retainers engage the sensor.
  4. Install the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) , Fuel Tank Fuel Pump Module Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) .
scientia non olet · About LEMON Manuals