LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement (Without Actuator)

Camshaft Position Sensor Replacement (Without Actuator)

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Camshaft Position Sensor (Without Actuator)
GM2491402Courtesy of GENERAL MOTORS COMPANY
Camshaft Position Sensor Replacement (Without Actuator)

Callout Component Name
1 Camshaft Position Sensor Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
12 N.m (106 lb in)
2 Camshaft Position Sensor
Procedure 
Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals