LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Inlet Hose/Pipe Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Surge Tank Inlet Hose & Clamps
    GM1698684Courtesy of GENERAL MOTORS COMPANY
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Reposition the surge tank inlet hose clamp from the radiator.
  3. Remove the surge tank inlet hose from the radiator.
    4. Fig 2: View Of Surge Tank Outlet Hose & Surge Tank
    GM659059Courtesy of GENERAL MOTORS COMPANY
  4. Reposition the surge tank inlet hose clamp at the surge tank.
  5. Remove the surge tank inlet hose (1) from the surge tank.
scientia non olet · About LEMON Manuals