LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Fan Replacement (Mechanical) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Special Tools J-48460 & J 41240-5A
    GM2087072Courtesy of GENERAL MOTORS COMPANY
  1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical) .
  2. Install the J-48460  Fan Clutch Remover and Installer Kit (1).
  3. Install the J 41240-5A  Fan Clutch Wrench (2).
    4. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS COMPANY
  4. Remove the fan hub nut from the water pump in a counterclockwise rotation.
    5. Fig 3: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS COMPANY
  5. Remove the fan clutch bolts from the rear of the fan blade.
  6. Separate the fan clutch from the fan blade.
scientia non olet · About LEMON Manuals