LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Fan Replacement (Mechanical) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING:

Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

    Fig 1: Installing Fan Clutch To Fan Blade
    GM721992Courtesy of GENERAL MOTORS COMPANY
  1. Install the fan clutch onto the fan blade.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the fan clutch bolts.

    Tighten 

    Tighten the bolts to 23 (17 lb ft).

    3. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS COMPANY
  3. Install the fan assembly.
    4. Fig 3: View Of Special Tools J-48460 & J 41240-5A
    GM2087072Courtesy of GENERAL MOTORS COMPANY
  4. Install the J-48460  Fan Clutch Remover and Installer Kit (1) and J 41240-5A  Fan Clutch Wrench (2).

    Tighten 

    Tighten the nut clockwise to 56 (41 lb ft).

  5. Install the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical) .
scientia non olet · About LEMON Manuals