LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Cooling Fan & Retainers
    GM1505516Courtesy of GENERAL MOTORS COMPANY
  1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement (Non-HP2) , Cooling Fan and Shroud Replacement (HP2) .
  2. Remove the cooling fan blade retainers.
  3. Remove the cooling fan blades.
scientia non olet · About LEMON Manuals