LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Motor Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Cooling Fan Motor & Bolts
    GM1505517Courtesy of GENERAL MOTORS COMPANY
  1. Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) , Engine Coolant Fan Replacement (HP2) .
  2. Remove the cooling fan motor bolts.
  3. Remove the cooling fan motor(s).
scientia non olet · About LEMON Manuals