LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Motor Replacement (Non-HP2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Cooling Fan Motor & Bolts
    GM1505517Courtesy of GENERAL MOTORS COMPANY
  1. Install the cooling fan motor(s).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the cooling fan motor bolts.

    Tighten 

    Tighten the bolts to 10 N.m (89 lb in).

  3. Install the cooling fan blades. Refer to Engine Coolant Fan Replacement (Non-HP2) , Engine Coolant Fan Replacement (HP2) .
scientia non olet · About LEMON Manuals