Engine Coolant Fan Motor Replacement (HP2)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Engine Coolant Fan Motor (HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) , Engine Coolant Fan Replacement (HP2) Disconnect the electrical connectors from the cooling fans.
1	Cooling Fan Motor Bolts (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Cooling Fan Motor(s).

Callout

Component Name

Preliminary Procedures

Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) , Engine Coolant Fan Replacement (HP2)
Disconnect the electrical connectors from the cooling fans.

Cooling Fan Motor Bolts (Qty: 6)

CAUTION:

Tighten
10 N.m (89 lb in)

Cooling Fan Motor(s).