LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Lower Shroud Replacement (Mechanical) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Cooler Hose Clip At Lower Fan Shroud
    GM367017Courtesy of GENERAL MOTORS COMPANY
  1. Remove the radiator. Refer to Radiator Replacement (Non HP2) , Radiator Replacement (HP2) .
  2. Disengage the two clips from the radiator.
  3. If equipped with engine oil cooler , remove the oil cooler hose clip from the lower fan shroud.
  4. Remove the shroud from the vehicle.
scientia non olet · About LEMON Manuals