Typical Scan Tool Data

WARNING: This page is about a different variant/trim than selected.

FC Relay 1, 2 and 3 Ckt Open, Short Gnd, and Short Volts Test Status

Circuit	Short to Ground	Open	Short to Voltage
Operating Conditions: Component Commanded OFF Parameter Normal Range: The following illustrates the normal parameter state with no circuit conditions: Component OFF - OK for Open/Short Gnd test and Not Run for Short to Volts test Component ON - Not Run for Open/Short Gnd test and OK for Short to Volts test
Ignition Voltage Circuit	Fault	Fault	-
Fan Low Relay Control Circuit	Fault	Fault	-
Fan Mid 1, Mid 2 and Fan Control Relay Control Circuit	Fault	Fault	Not Run
Fan High Relay Control Circuit	Fault	Fault	Not Run

FC Relay 1, 2 and 3 Ckt Open, Short Gnd, and Short Volts Test Status

Circuit	Short to Ground	Open	Short to Voltage
Operating Conditions: Component Commanded ON Parameter Normal Range: The following illustrates the normal parameter state with no circuit conditions: Component OFF - OK for Open/Short Gnd test and Not Run for Short to Volts test Component ON - Not Run for Open/Short Gnd test and OK for Short to Volts test
Ignition Voltage Circuit	Not Run	Not Run	-
Fan Low Relay Control Circuit	Not Run	Not Run	Fault
Fan Mid 1, Mid 2 and Fan Control Relay Control Circuit	Not Run	Not Run	Fault
Fan High Relay Control Circuit	Not Run	Not Run	Fault