LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System) >> Diagnostic Information and Procedures >> Cooling Fan Inoperative (with HP2) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition ON, observe the DTC information with a scan tool. Verify that DTC P0480 or P0481 is not set.
  2. Ignition ON, command the cooling fans ON and OFF at high, medium, and low speed with a scan tool. Verify that both fans turn ON and OFF when changing between the commanded states.