LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 5.3L, 6.0L, 6.2L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Valve Lifter Removal (Without Active Fuel Management)

Valve Lifter Removal (Without Active Fuel Management)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Valve Lifter Guides, Cylinder Head & Bolts
    GM1403318Courtesy of GENERAL MOTORS COMPANY
  1. Remove the guide bolts (211).
  2. Remove the guides (210) with lifters.

    Note the installed position of the guides. The notched area of the guide is to align with the locating tab on the block.

    3. Fig 2: Valve Lifter Guides & Bolts
    GM1403319Courtesy of GENERAL MOTORS COMPANY
  3. Remove the valve lifters (209) from the guide (210).
  4. Organize or mark the components so they can be installed in the same location from which they were removed. Refer to Separating Parts .
scientia non olet · About LEMON Manuals