LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 5.3L, 6.0L, 6.2L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Engine Block Valley Cover Removal

Engine Block Valley Cover Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Valley Cover & Gasket
    GM1403316Courtesy of GENERAL MOTORS COMPANY
  1. Remove the valley cover bolts (506).
  2. Remove the valley cover (555) and gasket (556).
  3. Remove the O-ring seals (537) from the cover.
    4. Fig 2: View Of Oil Pressure Sensor & Washer
    GM1403317Courtesy of GENERAL MOTORS COMPANY
  4. Remove the oil pressure sensor (706) and washer (707), as required.
scientia non olet · About LEMON Manuals