LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Description And Operation) >> Description and Operation >> Fuel System Description >> Liquid Fuel Pressure Sensor - With FPCM

Liquid Fuel Pressure Sensor - With FPCM

WARNING: This page is about a different variant/trim than selected.

The fuel pressure sensor is a serviceable 5-volt, 3-pin device. It is located on the fuel feed line forward of the fuel tank, and receives power and ground from the fuel pump flow control module (FPCM) through a vehicle wiring harness. The sensor provides a fuel pressure signal to the FPCM, which is used to provide Closed Loop fuel pressure control.