Conditions for Setting the DTC

P0340 Condition 1 

The ECM does not detect a camshaft position (CMP) sensor pulse for greater than 5.5 s or greater than 4.0 s since the time the starter has been engaged.

Condition 2 

The ECM detects less than 4 camshaft position (CMP) sensor pulses for greater than 3.0 s.

Condition 3 

The ECM does not detect a camshaft position (CMP) sensor pulse during the first 2 engine revolutions.

Condition 4 

The ECM does not detect a camshaft position (CMP) sensor pulse during 200 engine revolutions.

P0341 Condition 1 

The ECM detects less than 2 or greater than 8 camshaft position (CMP) sensor pulses for during the first 2 engine revolutions.

Condition 2 

The ECM detects less than 398 or greater than 402 camshaft position (CMP) sensor pulses during 200 engine revolutions.