Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135 or P2176 is not set.
The ignition voltage is between 10-32 V.
The engine run time is greater than 300 s.
The fuel system is in Closed Loop.
The DTCs run continuously when the above conditions are met.