Conditions for Running the DTC

P0131, P0137, P0151, or P0157

• DTC P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135 or P2176 is not set.
• The engine is operating in Closed Loop.
• The Ignition voltage is between 10-32 V.
• The fuel level is greater than 10 %.
• The throttle position (TP) is between 3-70 %.
• The DTCs run continuously when the above conditions are met for 2 s.

P0132, P0138, P0152, or P0158

• DTC P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135 or P2176 is not set.
• The engine is operating in Closed Loop.
• The Ignition voltage is between 10-32 V.
• The fuel level is greater than 10 %.
• The throttle position (TP) is between 0-70 %.
• The DTCs run continuously when the above conditions are met for 2 s.