LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - DTC P0442 To DTC P3449 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0700 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

Diagnostic trouble code (DTC) P0700 is an informational DTC that indicates that an emission related transmission DTC has set in the transmission control module (TCM). The engine control module (ECM) turns ON the malfunction indicator lamp (MIL) when the TCM sends a message over the serial data circuit requesting MIL illumination. The DTC information for the ECM will only display DTC P0700, and the ECM Freeze Frame/Failure Records data will display the engine operating conditions that were present when the transmission DTC was set. The TCM Freeze Frame/Failure records data is available from the DTC that was set in the TCM.