Conditions for Running the DTCs

P0601, P0604

• The ignition switch is in Run or Crank.
• These DTCs run continuously when the above condition is met.

P0602, P0603, P062F

• The ignition switch is in Run or Crank.
• These DTCs run once per ignition cycle.

P0606, P0607, P060D

• The ignition switch is in Run or Crank.
• The system voltage is more than 6.0 V.
• Reduced Engine Power is not active.
• These DTCs run continuously when the above conditions are met.

P2610

• The intake air temperature is between -40 to +125°C (-40 to +257°F).
• DTC P2610 runs once per ignition cycle on ECM power down.