Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P00C8, P00C9, P16A0, P16A1, P16A2, P16F3, P0068, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0125, P0128, P160D, P160E, P0191, P0192, P0193, P0220, P0222, P0223, P0443, P0449, P0452, P0453, P0454, P0464, P0496, P0502, P0503, P0601, P0604, P0606, P0608, P0609, P0641, P0651, P0722, P0723, P1104, P1516, P1682, P2100, P2101, P2102, P2103, P2119, P2120, P2122, P2123, P2125, P2127, P2128, P2135, P2138, P2176, P2227, P2228, P2229, P2230 are not set.
The ignition voltage is between 11-32 V.
The barometric pressure (BARO) is more than 70 kPa.
The fuel level is between 10-90 %.
The cold start-up engine coolant temperature (ECT) and the start-up intake air temperature (IAT) are equal to or less than 8°C (46°F).
The startup engine coolant temperature (ECT) is less than 35°C (95°F).
The startup intake air temperature (IAT) is between 4-30°C (39-86°F).
DTC P0455 runs once per cold start when the above conditions are met.