LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Hybrid (LZ1) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Drive Belt Tensioner Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Drive Belt Tensioner
    GM1959995Courtesy of GENERAL MOTORS COMPANY
  1. Install the drive belt tensioner (2).
  2. Install the drive belt tensioner bolts (1).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Tighten the drive belt tensioner bolts.

    Tighten 

    Tighten the bolts to 50 N.m (37 lb ft).

  4. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals