LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Hybrid (LZ1) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Drive Belt Idler Pulley Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Drive Belt Idler Pulley
    GM1959938Courtesy of GENERAL MOTORS COMPANY
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement .
  2. Loosen the drive belt idler pulley bolt (1).
  3. Remove the drive belt idler pulley (2) and bolt.
scientia non olet · About LEMON Manuals