LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Hybrid ( LZ1) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

    Fig 1: View Of Oil Level Indicator, Tube Bolt, Indicator Tube & O-Ring Seal
    GM1658141Courtesy of GENERAL MOTORS COMPANY
  1. Remove the oil level indicator (418) from the tube.
  2. Remove the oil level indicator tube bolt (419).
  3. Remove the oil level indicator tube (420) from the engine block.
    4. IMPORTANT:

    Inspect the O-ring for cuts or damage. The O-ring seal may be used again if it is not cut or damaged.

  4. Remove the O-ring (421) from the tube, as required.
scientia non olet · About LEMON Manuals