LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Hybrid ( LZ1) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Automatic Transmission Flex Plate Removal

Automatic Transmission Flex Plate Removal

    Fig 1: View Of Automatic Transmission Flex Plate
    GM1967302Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    The flex plate does not use a locating pin for alignment and will not initially seat against the crankshaft flange, but will be pulled onto the crankshaft by the engine flex plate bolts. This procedure requires a 3 stage tightening process.

  1. Remove the engine flex plate bolts.
  2. Remove the flex plate.
scientia non olet · About LEMON Manuals