LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Master Cylinder Reservoir Replacement (JH6) >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Master Cylinder Reservoir Bolts
    GM2151554Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Brake Fluid Irritant Warning .

    CAUTION:

    Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

  1. Using a suitable tool, remove the brake fluid from the brake master cylinder reservoir.
  2. Discard the brake fluid into an approved container.
  3. Disconnect the brake fluid level indicator switch electrical connector.
  4. Remove the master cylinder reservoir bolts (1).
    5. Fig 2: View Of Master Cylinder Reservoir
    GM2151558Courtesy of GENERAL MOTORS COMPANY
  5. Carefully lift the master cylinder reservoir (1) straight upward and remove the reservoir from the master cylinder.
    6. Fig 3: View Of Master Cylinder Reservoir Seals
    GM2151560Courtesy of GENERAL MOTORS COMPANY
  6. Remove the master cylinder reservoir seals (1).
scientia non olet · About LEMON Manuals