LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Brake Pedal Assembly Replacement (J90, J95, J96, JH6, Two-mode Hybrid) >> Removal Procedure

Removal Procedure

  1. Block the drive wheels.
    2. Fig 1: Brake Pedal Position Sensor Bolt
    GM2690215Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the brake pedal position sensor electrical connector.
  3. Remove the brake pedal position sensor bolt (1).
    4. Fig 2: Brake Pedal Position Sensor
    GM2690226Courtesy of GENERAL MOTORS COMPANY
  4. Remove the brake pedal position sensor (1).
    5. Fig 3: Power Brake Booster Pushrod Retaining Clip Bolt
    GM2716605Courtesy of GENERAL MOTORS COMPANY
  5. Remove the power brake booster pushrod retaining clip bolt (1).
    6. Fig 4: Power Brake Booster Pushrod Retaining Clip
    GM2716606Courtesy of GENERAL MOTORS COMPANY
  6. Remove the power brake booster pushrod retaining clip (1).
  7. Disconnect the power brake booster pushrod.
    8. Fig 5: Brake Pedal Return Assist Spring
    GM2745420Courtesy of GENERAL MOTORS COMPANY
  8. Unhook the brake pedal return assist spring (1) from the brake pedal arm to release the spring tension.
    9. Fig 6: Brake Pedal Pivot Nut
    GM2716607Courtesy of GENERAL MOTORS COMPANY
  9. Remove the brake pedal pivot nut (1).
    10. Fig 7: Brake Pedal Pivot Bolt
    GM2716608Courtesy of GENERAL MOTORS COMPANY
  10. Remove the brake pedal pivot bolt (1).
    11. Fig 8: Brake Pedal
    GM2716609Courtesy of GENERAL MOTORS COMPANY
  11. Remove the brake pedal (1).
    12. Fig 9: Brake Pedal Return Assist Spring
    GM2745423Courtesy of GENERAL MOTORS COMPANY
  12. Remove the brake pedal return assist spring (1).
    13. Fig 10: Brake Pedal Return Assist Spring Bushing
    GM2745424Courtesy of GENERAL MOTORS COMPANY
  13. Remove the brake pedal return assist spring bushing (1).
  14. Inspect the brake pedal return assist spring and bushing for wear or damage and replace, if necessary.
scientia non olet · About LEMON Manuals