Brake Fluid Level Indicator Switch Replacement (Two-mode Hybrid)

Fig 1: Brake Fluid Level Indicator Switch (Two-mode Hybrid)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Place the ignition switch in the OFF position. Disconnect the brake fluid level sensor electrical connector.
1	Brake Fluid Level Sensor TIP: Compress the brake fluid level sensor locking tabs on the opposite side of the master cylinder reservoir to remove.

Callout

Component Name

Preliminary Procedures

Brake Fluid Level Sensor
TIP: Compress the brake fluid level sensor locking tabs on the opposite side of the master cylinder reservoir to remove.