Rear Seat Number 2 Riser Latch Assembly Replacement

Fig 1: View Of Rear Seat No. 2 Riser Latch Assembly Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to 3rd Row Seat Removal and Installation (Suburban/Yukon XL) , 3rd Row Seat Removal and Installation (Tahoe/Yukon/Escalade) .
1	Rear Seat Hinge Finish Cover
2	Rear Seat Cushion Trim Panel
3	Rear Seat Latch Trim Cover
4	Rear Seat #2 Load Floor Latch Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
5	Rear Seat #2 Load Floor Latch
6	Rear Seat #2 Load Floor Latch Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
7	Rear Seat #2 Load Floor Latch Shaft