Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Bucket)

Fig 1: View Of Rear Seat Armrest, Bolt & Finish Cover

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Rear Seat Armrest Bolt Finish Cover Procedure During re-installation make sure to orientate the finish cover locator to armrest assembly notch.
2	Rear Armrest Nut CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
3	Rear Seat Armrest
4	Rear Seat Armrest Double Ended Stud CAUTION: Refer to Fastener Caution . Tighten 15 N.m (11 lb ft)