Rear Seat 3rd Row Hinge Finish Cover Replacement

Fig 1: View Of Rear Seat Hinge Finish Cover & Screws And Shoulder Belt Opening Bezel & Screws

Courtesy of GENERAL MOTORS COMPANY

Rear Seat 3rd Row Hinge Finish Cover Replacement

Callout	Component Name
Preliminary Procedure  Remove the Rear Seat No. 2 Back Cushion Cover. Refer to 3rd Row Seat Back Cover and Pad Replacement .
1	Rear Seat Hinge Finish Cover Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten  2 N.m (18 lb in)
2	Rear Seat Hinge Finish Cover TIP:  Slide the belt out through the slit in the back of the bezel.