LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> 3rd Row Seat Back Hinge Finish Cover Replacement (AW2)

3rd Row Seat Back Hinge Finish Cover Replacement (AW2)

Fig 1: View Of Rear Seat No.2 Back Cushion Hinge Finish Cover & Screw
GM1683825Courtesy of GENERAL MOTORS COMPANY
3rd Row Seat Back Hinge Finish Cover Replacement (AW2)

Callout Component Name
1 Rear Seat No. 2 Back Cushion Hinge Finish Cover Screw
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Rear Seat No. 2 Back Cushion Hinge Finish Cover
  1. Tilt the opposite seat forward to allow access to the inner finish cover.
  2. Pull away from the seat to disengage the integral retainers.
scientia non olet · About LEMON Manuals