Rear Wheelhouse Liner Replacement (RPO HP2)
Rear Wheelhouse Liner Replacement (RPO HP2)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel) , Tire and Wheel Removal and Installation (8-Lug Wheel) . |
|
| 1 | Rear Wheelhouse Panel Liner Screw (Qty: 6)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 2 | Rear Wheelhouse Panel Liner Plastic Retainer (Qty: 4) |
| 3 | Rear Wheelhouse Panel Liner TIP: Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the rear wheelhouse panel liner. |