LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

Fig 1: View Of Rear Fascia Step Pad
GM1700028Courtesy of GENERAL MOTORS COMPANY
Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

Callout Component Name
Preliminary Procedure 
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) , Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) , Rear Bumper Fascia Replacement (Escalade Premium) .
1 Rear Fascia Step Pad
TIP:  Remove the chrome trim piece and use a trim panel removal tool to gently pry the pad upwards. It may be necessary to reach under the backside of the fascia and squeeze the pad clips to assist in the release.