Front Bumper Fascia Support Replacement (Chevrolet HP2)

Fig 1: View Of Front Bumper Fascia Support & Bracket Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front fascia. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , .
1	Front Bumper Fascia Support Bolt (Qty: 8) CAUTION: Refer to Fastener Caution . Tighten 7 N.m (62 lb in)
2	Front Bumper Fascia Support Procedure Disconnect any electrical connectors. Transfer parts as needed.

Callout

Component Name

Front Bumper Fascia Support Bolt (Qty: 8)

CAUTION:

Tighten
7 N.m (62 lb in)

Front Bumper Fascia Support

Procedure