LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Back Cushion Frame Replacement (without HP2)

Driver or Passenger Seat Back Cushion Frame Replacement (without HP2)

Fig 1: Front Seat Back Frame
GM1950027Courtesy of GENERAL MOTORS COMPANY
Driver or Passenger Seat Back Cushion Frame Replacement (without HP2)

Callout Component Name

Preliminary Procedure

  1. Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cover and Pad Replacement (with HP2) , Driver or Passenger Seat Back Cover and Pad Replacement (without HP2) .
  2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) , Seat Cushion Trim Cover and Pad Replacement (with HP2) .
1 Front Seat Back Frame Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
50 N.m (37 lb ft)
2 Front Seat Back Frame

Procedure

  1. Disconnect the electrical connector, if equipped.
  2. When replacing the seat back frame transfer components as necessary.
scientia non olet · About LEMON Manuals