3rd Row Seat Back Latch Cable with Pull Handle Replacement

Fig 1: View Of Rear Seat No. 2 Back Cushion Latch, Nuts & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to 3rd Row Seat Removal and Installation (Suburban/Yukon XL) , 3rd Row Seat Removal and Installation (Tahoe/Yukon/Escalade) . Remove the rear seat cushion trim covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1	Rear Seat Latch Release Handle Refer to Rear Seat Latch Release Handle Replacement (Rear No. 2) .
2	Rear Seat No. 2 Back Cushion Latch Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
3	Rear Seat No. 2 Back Cushion Latch Bolt (Qty: 2) Tighten 9 N.m (80 lb in)
4	Rear Seat No. 2 Back Cushion Latch TIP: Release the latch cables from the seat, note the locations for installation.