Driver or Passenger Seat Cushion Frame Replacement

Fig 1: View Of Front Seat Cushion Frame & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (without HP2) , Front Seat Removal and Installation - Bucket (with HP2) .
1	Front Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2) , Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) , Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) .
2	Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (without HP2) , Front Seat Cushion Inner Trim Panel Replacement (with HP2) .
3	Front Seat Riser Finish Cover Procedure Pull rearward to disengage the cover from the seat riser.
4	Seat Back Frame Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 5 N.m (44 lb in)
5	Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) , Seat Cushion Trim Cover and Pad Replacement (with HP2) .
6	Front Seat Cushion Frame Nut (Qty: 4) Refer to Front Seat Adjuster Replacement (with HP2) , Front Seat Adjuster Replacement (without HP2) . Tighten 5 N.m (44 lb in)
7	Heated Seat Module Procedure Disconnect the electrical connector.
8	Front Seat Cushion Frame TIP: If working on the passenger seat, remove the inflatable restraint passenger presence system. Refer to Inflatable Restraint Passenger Presence System Replacement - Front (without Yukon Hybrid and Tahoe Hybrid) , Inflatable Restraint Passenger Presence System Replacement - Front (Yukon and Tahoe Hybrids NOT Denali) .